Aroza Manual

Welcome Note

Aroza brings Chamelo's signature tint-adjusting technology to the mountain. With three tint levels that you control with a single press, these goggles adapt to whatever conditions the mountain throws at you. From flat light to bluebird days, Aroza delivers peak visibility from first chair to last run.

Featuring spherical lenses for an extra-wide field of view, double-layer anti-fog construction, and triple-layer face foam, Aroza keeps your vision crystal clear through every run.

We built these for riders who demand total control over their vision on the mountain.

Enjoy!

Quick Tips for Use

Charge before use: Fully charge the goggles before using them for the first time.
Operating temperature: Aroza is built for extreme cold, operating from -30°C to 30°C (-22°F to 86°F).
Storage: Store in the provided soft cloth bag and protective case when not in use.
Always on: Aroza is always ready to go. There is no power button—just press the button at the bridge to adjust your tint.

Specifications

Lens Material: Double-layer PC with liquid crystal film
Lens Shape: Spherical
Light Transmission (VLT): 45%-13% (3 levels)
UV Protection: 100% UVA/UVB at all tint levels
Frame Material: TPU
Face Foam: Triple-layer
Strap Material: Polyester + Elastic + Silicone grip
Battery Type: Lithium-ion supercapacitor (190F)
Battery Life (tint adjustment): 50 hours
Charging Time: 1 hour (0-100%)
Charge Input: 4mm electronic pogo pin
Dimensions: 190mm x 170mm
Weight: 223g (7.9 oz)
Water Resistance: IPX4
Operating Temperature: -30°C to 30°C (-22°F to 86°F)
Helmet Compatible: Yes

Operation Instructions

Lens Removal and Installation

The lens connects to the frame via a pogo pin connection. This connection is critical for the tint-adjusting technology to function properly.

If your goggles are not changing tint, check the lens connection first. The contacts on the lens must be properly aligned and seated with the contacts on the frame for the electronics to work.

Only remove the lens to clean it.
When reinstalling, carefully align the electronic contacts.
You should feel the magnets engage when the lens is properly connected.
The frame and lens at the top should be perfectly flush when properly installed.
If tint control is not responding, remove and reseat the lens to ensure proper connection.

Tint Adjustment

Press the Chamelo logo button at the bridge of the goggles to cycle through three tint levels:

Level 1: 45% VLT — Low light, overcast, storm days
Level 2: 28% VLT — Variable conditions, morning/afternoon
Level 3: 13% VLT — Bright sun, bluebird days

The goggles cycle through the levels in order: Level 1 → Level 2 → Level 3 → Level 1 (repeat).

Always On: Aroza has no power button. The goggles are always ready to use—just press the button to adjust your tint.

UV Protection

Lenses provide 100% UVA/UVB protection at all tint levels—from the lightest to the darkest setting.

Charging and Battery

Charging: Use the included 4mm pogo pin cable.
Red LED: Charging in progress
LED Off: Fully charged
Charge Time: 1 hour from empty to full
Battery Life: 50 hours of tint adjustment on a single charge

Cleaning and Care

Lens care: Use the included soft cloth bag or a microfiber cloth to clean the outer lens. Never wipe the inner lens—let it air dry to preserve the anti-fog coating.
Magnetic contacts: Keep the magnetic contact points clean and free of debris for reliable tint control.
Temperature: Store and use between -30°C to 30°C (-22°F to 86°F) for optimal performance.
Storage: Keep in the provided soft cloth bag when not in use.
Water resistance: Aroza is IPX4 rated—built to handle snow, sweat, and moisture during use.

Important Safety Information

Safe tint adjustment: Only adjust the tint when stationary and safe to do so.
Battery: Aroza features a built-in rechargeable battery. Do not attempt to replace or modify it. If Aroza runs out of battery it will revert to the lightest state.
Extreme cold: While Aroza operates down to -30°C, battery life may be reduced in extreme cold conditions.
Product care: Handle with care—avoid subjecting the inside of the lens to heavy impacts.
Charging safety: Unplug after charging is complete. Use only the included charging cable.

Troubleshooting

Tint is not changing when I press the button:

Check that the lens is properly seated. Remove and reinstall the lens, ensuring the magnetic contacts are aligned.
Ensure the goggles are charged. Connect to the charger—if the red LED appears, the battery was depleted.
Clean the magnetic contact points on both the lens and frame.

Goggles are fogging:

Ensure vents are not blocked.
Do not wipe the inner lens—let it air dry.
If inner lens is wet, remove lens and allow both lens and frame to dry completely before reassembly.

No LED indicator when charging:

Ensure the charging cable is properly connected. The pogo pin connector should seat firmly.

Warranty & Support

Warranty Coverage

Your Aroza goggles are protected by a 1-year limited manufacturer warranty covering hardware defects under normal use conditions. The warranty does not cover damage from misuse or unauthorized modifications.